Fine-tuning Urban Terror configuration on linux

This has actually been too long ago, but I’ll to reproduce accurately. 🙂

First of all, why would you need to configure your urban terror install on linux? Can’t you just extract & play like on windows? Yeah, you could. Except when:

  1. You’re using a recent libcurl (which is used for downloading new maps through HTTP).
  2. You’re using an azerty keyboard (or a keyboard map which contains keys that are unknown to ioq3).

Which is quite a lot of people, at least, in Europe. 😉
Continue reading Fine-tuning Urban Terror configuration on linux

Adobe doesn’t like Opera?

I was idly surfing the Adobe knowledge base (yeah, one of my secret hobbies is memorizing KB’s ;)), when I encountered to my surprise the following instructions for uninstalling Adobe Bridge:

Remove remaining folders and files for Adobe Bridge

Back up any personal files you want to save from the following directories, and then remove the listed folders and files:

All versions

Documents and Settings\ [User Name] \Application Data\Adobe\Bridge
Documents and Settings\ [User Name] \Application Data\Adobe\Updater\Data\bridge1.aum
Documents and Settings\ [User Name] \Application Data\Adobe\Updater\Data\bridge1_meta.txt
Documents and Settings\ [User Name] \Application Data\Opera
Documents and Settings\ [User Name] \My Documents\Updater\bridge1
Documents and Settings\All Users\Application Data\Adobe\Updater\Certs\bridge.cer
Documents and Settings\All Users\Start Menu\Programs\Adobe Bridge
Program Files\Adobe\Adobe Bridge
Program Files\Common Files\Adobe\Launch\bridge\1.0
Program Files\Common Files\Adobe\StartupScripts\bridge.jsx
Program Files\Common Files\Adobe\StartupScripts\bridgecenter.jsx
Program Files\Common Files\Adobe\StartupScripts\ols.jsx

They cunningly snuck in an instruction to remove all Opera application data! Can you believe this? 🙂 how evil 😉

New record

In my studio I reached a new record for lowest temperature. I have a min-max thermometer, so it’s easy to know 🙂
Last night when I arrived, it was 6.5 °C. After 6 hours of electrical heating, it became 12 °C. yay. Today, I won’t reach it. I tried playing an FPS, but my aim is totally frozen. 🙂

My last record was about 9-10 years ago on my student room, where the wind was blowing over the floor due to bad insulation. I was in the highest room and since there always came air in the heating circuit (central heating) I was lucky to have water at all in my radiator. And in the event it reached my room, it had already cooled down since the heating pipes weren’t insulated. I somehow still managed to get 12 °C anyway although I think I added another electrical heating device to achieve a temperature this high 😉 I remember playing Half life with my gloves and hat on. Now I only need a hat, probably because there is no wind anymore.

The Crippled World of Modern Gaming

Citation on how the author experienced the end of Fallout 3:

The final quests consists of following a massive MechWarrior-esque robot who basically does all the killing and fighting for you. All you have to do is stay behind him and collect the loot of the dead Enclave soldiers – loot you’re not going to need anyway, but hey, in an RPG, grabbing loot is a reflex. You then shoot a few Enclave baddies in a building, flick a switch, and the game ends. It was so easy I kept on telling myself this was just an intro to a massive battle.

When I realised I had actually finished the game, I was all ready to grab some chips, and make me a nice pot of tea, but before I even got up off the couch, the ending sequence was already over. Five pictures slid by, with the voice over telling a three-sentence story, and that was it. The end. That’s your reward for 140 hours of gaming and 64 Euros. A sepia slideshow.

Usually, I’m not that much of a fan of Thom Holwerda’s somewhat provoking/sensational writing style, but this piece really is an entertaining read 🙂
Read the full story on OSNews

Camera paranoid

I wish I could say they were just polaroids 😉 Lately, I have noted a surge in speed radars. But not just anywhere: on the highway! It’s really frightening: one day there’s nothing, next day you’re flashed before you know it! 😉 I, as a true Belgian citizen, am not used to such an agile deployment! 😉 And there isn’t even a warning. Yes, you can try the official channel, but it lags behind and is not complete as municipalities can install radars on their own initiative. Yes, you can try the community, but it seems down due to technical problems.. This one seems interesting, but looks like it is more dedicated to mobile radars. So, if no one knows, go to your neighbors. That’s right, Dutch people have been exposed, hence obsessed, by speed radars much longer than Belgian people. They are so friendly to lend their infrastructure to the Belgians to help lighten the burden. 🙂
But there is still room for improvement: I for one, would like to be able to subscribe to a customized RSS feed which would alert me of new radars.

Anyway, here is a list of camera’s newly installed on the roads I travel the most. I didn’t mention the ones on the southern part of the R0 (around waterloo, the big turn) as this is clearly indicated with road signs. There is also one around Tervuren 4 armen crossroads but I don’t remember the exact location..


View Larger Map

Update: Apparently, I underestimated the media once more. 🙂 A nice summary of the upcoming speed radars, separated nicely in a highway and “rural” category can be found here. Here the google map:

Grotere kaart weergeven
As you can see, there are also a few planned around Kortrijk!

opensuse 11.0 to 11.1 upgrade story

I am always a bit reluctant to upgrade instead of just install because it is a much less tested use case and there is always the conflict between your own preferences and new defaults: who has precedence? But an OS should be meant to be upgradable, right? I know, most people are not confronted with the issue since Windows isn’t exactly what I would call an good example of an upgradable OS 😉 Linux users are much more confronted with the upgrade issue since most distro’s put out at least one release a year. I always give the upgrade a shot, but most of the time I also do a new install just to know how the new release was meant to be conceived. 😉

So here is my upgrade story for my laptop: it’s a Dell D830 with Nvidia Quadro NVS 140 and Intel(R) PRO/Wireless 3945ABG.

The upgrade procedure itself went smooth although I never really know if I have to enable more repositories or not when asked. The upgrade will by default only take the default suse repo’s into account. So I left it that way, but it could explain a few issues I ran into later..

Anyway, after the upgrade reboot, I don’t get a graphical login screen.. I run sax2, and this fixes the issue, but nvidia driver is not used. So I add the nvidia repo from the community repository list. I see there is now a new driver “G02” instead of the “G01” I used to use. So I mark this package for installation, but some dependencies fail.. I don’t know the exact list anymore, but one of them was related to the kernel, which surprised me as I just upgraded (but I did have the jengelh realtime kernel installed before I upgraded).

Something was odd with the package management.. and I also got an error that updates could not be found because no backend was configured. what the..? So next thing to do, was configure the online update. When I tried that, it wouldn’t work because “SSL negotation failed”. This definitely smelled like a bug, so I filed one and it has already been confirmed by a suse employee by now.

So I added the update repo manually (although I had read about the new smolt integration and would’ve loved to register my system) and configured the new updater applet (kupdateapplet, which supports packagekit) to use the zypper backend which I first had to install manually (kde4-kupdateapplet-zypp). Finally some updates were found, but the new tool failed to install the patches (have to file a bug next time patches are issued) and asked me if I wanted to use yast instead. Funny how they anticipated problems there. 🙂 Using yast, there was no problem of course. The smolt update even triggered a proper nvidia install without dependency problems.

Having updated, after I relogged on, the nvidia driver was effective and remembered its configuration from before the upgrade. Since the version was now called G02, I had high hopes that this would incorporate all the fixes NVidia addressed in their beta drivers to get rid of the KDE4 desktop effects performance problems, but alas, it seems this is still beta. I might want to install the beta driver after all, I’m tired of the bad performance. 😉 My ATI radeon 9800 PRO in my desktop performs better! Although I have to admit, even the stable nvidia drivers seem to have received a few improvements the last few months.

That’s it for now!

New google reader – render problem in opera

Whether you like the new look or not, it seems there is an issue with long feed names being wrapped at the icon position which wastes valuable space (read my problem description and support request here). The day after, I already received a fix from an Opera employee 🙂 very simple, just use the following user css file:

.scroll-tree .name {
padding-left: 0 !important;
position: relative !important;
left: 17px !important;
}

If you are unfamiliar with user css: right-click on the page and edit the site preferences. In the display tab, point the “my style sheet” to the relevant user css file. Make sure “my style sheet” usage is enabled in Preferences->content->style options->presentation modes->author mode->my style sheet (also more easy accessible through manage modes under the style mode button on the extended view bar if you use that).